Installation · MP1, MP1+, MP2, MP3
Office Pod Assembly Video: Six Panels, About One Hour
This sped-up video shows two people assembling an MP1+ phone booth. Every MobileX MP model uses the same six-panel structure, so MP1, MP2 and MP3 go together the same way: about one hour with our video guide, without a specialist installer.
6 panelsJoined with 12 structural screws
~1 hourWith our video guide
2 peopleAs shown in the video
Same methodFor every MP model
The Main Steps in the Video
- Walls and frontStand the back and side panels and the front frame with the glass door.
- RoofLift the roof panel onto the walls.
- FixingJoin the six main panels with the twelve structural connection screws.
- InteriorFinish the floor and interior, then place the desk or seat.
- Check and powerCheck that the door closes properly, then connect power as local rules require.
Same Method for Every MP Model
MP1, MP1+, MP2 and MP3 share the same structure, so one video guide covers the whole range.
Before the Pod Arrives
Check on site
- Door and lift access for the export crates
- Floor space from the approved model drawing
- A power point near the pod, connected as local rules require
What we send with every order
- Assembly video guide and online support
- Approved drawing for each model
- Production, inspection and packing photos
Get a Quote with Assembly Support
Send the model, quantity and delivery city. We reply within 12 hours.